Staklo postrojane cijevi i fittings

Staklene oblozene cijevi i okovi imaju karakteristike antikoroziji, visoke temperaturne otpornosti, otpornosti na pritisak, dobrih performansi zaptiva i otpornosti na wear.

Pošaljite upit

Opis

Staklo postrojano cjevovoda i pribor je važan pribor za povezivanje svake staklene postrojane opreme. Ima karakteristike antikoroziju, visoku temperaturnu otpornost, otpornost na pritisak, dobre performanse zapiranja i otpornost na wear.

Fig-1 Glass lined pipes and fittings(001)

SPECIFIKACIJA PROIZVODA

Dizajnirani pritisak	≤1.0 Mpa
Dizajnirana temperatura	-20 do 200 °C
Debljina polozenog stakla	0,8 do 2,0 mm
Standardni Spec. Za staklene lined cijevi (HG/T 2130-2014)	DN25,DN32,DN40,DN50×L(100~500mm); DN65,DN80×L(100~1000mm); DN100,DN125×L(200~1500mm); DN150,DN200,DN250×L(200~2000mm); DN300,DN400×L(200~3000mm)
Standardni Spec. Za Stakleni lakat 30°,45°,60°,90°,180° (HG/T 2131~2135-2014)	DN25,DN32,DN40,DN50,DN65,DN80,DN100,DN125,DN150,DN200,DN250,DN300,DN400
Standardni Spec. Za Glass Lined Tee (HG/T 2136~2137-2015)	DN25-DN25; DN32-DN25,32; DN40-DN25, 32,40; DN50-DN25,32,40,50; DN65-DN25,32,40,50,65; DN80-DN32,40,50,65,80; DN100-DN40,50,65,80,100; DN125-DN50,65,80,100,125; DN150-DN65,80,100, 125,150; DN200-DN80,100,125,150,200; DN250-DN100,125,150,200,250; DN300-DN125,150,200,250,300; DN400-DN150,200,250, 300.400
Standardni Spec. Za staklo postrojivač (HG/T 2138~2139-2015)	DN32-DN25; DN40-DN25,32; DN50-DN25,32,40; DN65-DN25,32, 40,50; DN80-DN32,40,50,65; DN100-DN40,50,65,80; DN125-DN50,65,80,100; DN150-DN65,80,100,125; DN200-DN100,125,150; DN250-DN100,125,150,200; DN300-DN125,150,200,250; DN400-DN200,250,300
Standardni Spec. For Glass Lined ReducingFflange(HG/T 2140-2015)	DN40-DN25,32; DN50-DN25,32,40; DN65-DN32,40,50; DN80-DN50,65;DN100-DN50,65,80; DN125-DN50,65,80,100; DN150-DN65,80,100,125; DN200-DN80,100,125,150; DN250-DN100,125,150, 200; DN300-DN125,150,200,250; DN400-DN150,200,250,300
Svjećica Test za lining-staklo	20KV nakon ispaljenog stakla, i 10KV prije isporuke
Otpornost na temperaturu	Hladan šok: 110 °C, Termalni šok: 120 °C
Standard dizajna	GB/T25025-2010, HG/T2130~2135-2014, HG/T 2136~2140-2015, GB/T 20801.5-2020; ASME Section VIII. Div. 1 Unstamped Or Against customized
Nozzle & Flange Standard	HG/T(GB), ASME, JIS, DIN (Opcionalno)